Plug your microSD card into a USB adapter, then plug it into your computer. These are all cheap and plentiful, some examples of adapters are here and here. You will need a microSD card and a USB adapter. This is far simpler than the alternative, which is to connect a keyboard and monitor to the Raspberry Pi Zero W to then set up WiFi and SSH. When working with a Raspberry Pi Zero W, as there is no network port, you will need to enable WiFi and SSH as well so that you can connect to it when it first boots. When you are done hit CTRL + X then hit Y to save your changes.Preparing a Raspberry Pi Zero with WiFi and SSH Mendhak / Code Preparing a Raspberry Pi Zero with WiFi and SSH
Replace the values for ssid and psk with your network name and password. Nano will open a text editor, you want to go and edit these values. Note your own drive letter of the rootfs partition. Scroll up and take note of what drive letter has not been mounted yet from the output of the df -h command. Use the drive letter for your boot partition for this command: cd /mnt/i This will list the available drives you have. You can then use this command to verify that it worked properly. Replace i & I: and j & J: with YOUR specific drive letters in the code snippet below: sudo mkdir /mnt/i Open up the Ubuntu Bash shell (hit the windows key and type in Ubuntu and hit enter). In my case they are I: and J: as shown in the screen shots. Find the drive letter of your boot and rootfs drives. Here are some screen shots of my EXT2FSD and my explorer: You should simply be able to unplug the sd card and plug it back in for it to be recognized provided you have installed EXT2FSD. At this point you will need to use EXT2FSD to mount the linux ext4 partition on your MicroSD card. Open Etcher,select the image and then click flash. Insert or plug in your MicroSD card and it should be automatically detected by Windows. Mount your MicroSD card and use Etcher to flash the Raspbian ImageĪre pretty self explanatory so I'm not going to go in-depth.You have Windows Subsystem for Linux enabled (If not scroll to the WSL section at the bottom).This tutorial will be geared towards Windows 10 users. I have a Mac and a PC and I actually found this easier to do on my Windows 10 machine. That and you also have to create a file to enable SSH. So in this post I'm going to provide some background info and the steps that I took, as well as some reference materials.įor those of you who aren't familiar - basically after you flash your MicroSD card with the OS you have to go in and edit some config files so that when your Pi boots up it knows what network to connect to. That being said I recently set up a Raspberry Pi Zero-W (the headless way) and I had a pretty difficult time given that I didn't have a spare linux vm laying around. I don't want to reinvent the wheel here as some other posts have done.
0 kommentar(er)
